The following high and critical CVEs were resolved:

The following limitations in previous versions have been resolved:

Previous releases of Volt used control groups V1 to calculate the available memory on Kubernetes. However, recent updates to Kubernetes have switched to control groups V2, causing the V1 calculations to return incorrect and inflated values. This could result in the Volt server process exhausting memory and generating an out of memory error or triggering a resource limit and pausing.

With the release of 10.2.25, Volt now supports both control groups V1 and V2. All Kubernetes users are strongly encouraged to upgrade at their earliest convenience to avoid issues now or in the future.

Various packages within Volt Active Data have been updated to eliminate known security vulnerabilities, including:

The following limitations in previous versions have been resolved:

The following limitations in previous versions have been resolved:

All Volt V10.2 releases since 10.2.21 are supported by the latest Volt Operator for Kubernetes. This means you can start a database using Volt V10.2.23 simply by specifying the software version in the global.voltdbVersion property, as described in the Volt Operator for Kubernetes guide:

$ helm install mydb voltdb/voltdb \
  --set global.voltdbVersion=10.2.23

If you prefer to use the previous, V10-specific operator, you can do that by specifying the operator version using the --version qualifier and the software image in the cluster.clusterSpec.image.tag property:

$ helm install mydb voltdb/voltdb \
  --version=1.3 \
  --set cluster.clusterSpec.image.tag=10.2.23

The following limitations in previous versions have been resolved:

The following limitations in previous versions have been resolved:

Various packages within Volt Active Data have been updated to eliminate known security vulnerabilities, including:

The following limitations in previous versions have been resolved:

Various packages within Volt Active Data have been updated to eliminate known security vulnerabilities, including:

The following limitations in previous versions have been resolved:

The following limitations in previous versions have been resolved:

This release of the VoltDB Operator and Helm chart adds support for Kubernetes version 1.25. It can be used only on Kubernetes version 1.21 and later.

Kubernetes removed support for the deprecated PodSecurityPolicy in version 1.25. To this end, the default chart setting for global.rbac.pspEnabled has been changed from "true" to "false".

This release provides additional information and control when managing memory on VoltDB servers and in particular, the undo pool. The undo pool is used to store temporary information needed to "undo" a transaction in case it must be rolled back. The pool grows as needed, based on how much data is needed to undo the current transactions. If your workload includes certain infrequent but memory-intensive transactions (such as deleting large volumes of data on a weekly basis) the undo pool can grow quite large, artificially inflating the resident set size (RSS).

A column has been added to the results of the @Statistics system procedure MEMORY selector. The column, UNDO_POOL_SIZE, measures the amount of memory, in kilobytes, allocated for the undo pool.

A new system procedure, @PurgeUndo, lets you reset the undo pool size to zero. If you find your RSS growing incrementally and you suspect the undo pool, you can use the UNDO_POOL_SIZE column in the @Statistics MEMORY procedure results to verify the amount of space being consumed by the undo pool. If the pool is unnecessarily large, you can use the @PurgeUndo procedure to reset it.

Various packages within Volt Active Data have been updated to eliminate known security vulnerabilities, including:

The following limitations in previous versions have been resolved:

Various packages within Volt Active Data have been updated to eliminate known security vulnerabilities, including:

The following limitations in previous versions have been resolved:

Various packages within Volt Active Data have been updated to eliminate known security vulnerabilities, including:

The following limitations in previous versions have been resolved:

Information related to the configuration and status of the cluster, also available from the @SystemInformation system procedure, is now available as metrics shared through the Prometheus agent. See the sections on integrating with Prometheus in the Volt Administrator's Guide and Volt Kubernetes Administrator's Guide for more information about using Volt Active Data with Prometheus.

VoltDB does not use any of the components implicated in the published CVEs related to Log4J. However, to avoid any confusion, VoltDB has replaced the Log4J library with reload4J, a drop-in replacement that replicates the log4J namespace and functionality, but eliminates all known security vulnerabilities.

Various packages within Volt Active Data have been updated to eliminate known security vulnerabilities, including:

The following limitations in previous versions have been resolved:

The following package updates have been added to the Kubernetes release of Volt Active Data to address known security vulnerabilities:

The following limitations in previous versions have been resolved:

Several additional columns have been added to the first results table for the @Statistics DRPRODUCER selector (and the corresponding Prometheus agent metrics) to help evaluate the time between when binary logs are ready for transmission and when acknowledgement is received from the consumer. The new columns are the following and are reported in milliseconds:

The corresponding metrics in the Prometheus agent are:

The following limitations in previous versions have been resolved:

The following limitations in previous versions have been resolved:

The following limitations in previous versions have been resolved:

The following limitation in previous versions has been resolved:

The following limitations in previous versions have been resolved:

A number of improvements to database replication (DR) developed in the follow-on release (V11.x) have been backported to V10.2.8 to increase stability and reliability. These changes include:

The following limitations in previous versions have been resolved:

The jQuery libraries used by the VoltDB Management Center have been updated to the following versions to address security vulnerabilities:

In addition to the security updates, a number of functional improvements have been made to the VoltDB Management Center (VMC), including:

The following limitations in previous versions have been resolved:

The Prometheus agent for VoltDB has a new argument available when starting the agent from the shell command. The --credentials argument lets you specify a text file containing the authentication credentials for accessing the database when security is enabled. The file must define two properties, username and password. For example:

$ cat $HOME/mycreds.txt
username: admin
password: mySpecialPassword
$ ./voltdb/tools/monitoring/prometheus/voltdb-prometheus \
   --credentials $HOME/mycreds.txt

Using the --credentials argument instead of --username and --password avoids exposing your credentials on the command line to the ps command. Note that the file path must be specified as a full pathname, not a relative path.

VoltDB topics, which were released as a beta feature in V10.2, are now ready for production use. See the chapter on Streaming Data in the Using VoltDB manual for more information.

The following limitations in previous versions have been resolved:

The LIMIT PARTITION ROWS feature was deprecated in Version 9. It will be removed in Version 11. This is a change to the VoltDB schema syntax that is not forward compatible.

This means that if your database schema still contains the LIMIT PARTITION ROWS syntax, you need to remove the offending clause before upgrading to the upcoming major release. Fortunately, there is a simple process for doing this. You can use the ALTER TABLE {table-name} DROP LIMIT PARTITION ROWS statement to correct the table schema while the database is running and with no impact to the database contents.

The VoltDB Java client has two separate features that let you enable topology awareness (setTopologyChangeAware) and reconnection for lost connections (setReconnectOnConnectionLosss). Topology awareness uses existing connections to determine if there has been any changes to the servers or ports available and creates connections to all servers in the cluster. Reconnection periodically attempts to reconnect to a specific server and port if a connection is lost.

Previously, these features were mutually exclusive. However, there are times when you might require both. For example, topology awareness fails if there are no remaining connections (such as a cluster reboot). Whereas, reconnection can only reconnect to addresses it already knows; it cannot detect if a failed server restarts with a new address. To cover this situation, the client has been improved to allow both features to be enabled at the same time.

To aid in debugging, the VoltDB Operator now logs all of the commands it issues to the VoltDB processes running on the Kubernetes pods.

The VoltDB Java client has an autotune feature (with methods in the ClientConfig class) that was originally designed to assist in developing demo applications. This feature is now deprecated and will be removed in a future release.

Previously, VoltDB had a feature to enable complete read consistency (to protect against various failure scenarios). The clientConfig method setSendReadsToReplicasByDefault was associated with that feature. However, read consistency is now always enabled, so this method is obsolete and has been deprecated. It will be removed in a future release.

The following limitations in previous versions have been resolved:

This release includes a number of improvements to the licensing and management of VoltDB software. These improvements include:

The new voltadmin license command is the most important of these changes for users, since it allows you to update the license for a cluster without having to restart. Note that the cluster must be complete — with no missing nodes — when you update the license. For example:

$ voltadmin license new-license-file.xml

There is a beta utility, voltsql, that extends the standard sqlcmd utility adding command completion and other interactive aids. The added functionality never fully met its goals and maintaining two separate utilities is both impractical from a product perspective and confusing from a customer perspective. For that reason, voltsql is being deprecated and will be removed in the next major release.

In environments such as Kubernetes where IP addresses are transient, XDCR could take an extended period of time to reconnect a server on a remote cluster if the server restarted with a different address. The connection logic has been rewritten to accommodate these environments, eliminating the delay.

The following limitations in previous versions have been resolved:

VoltDB and the VoltDB Operator now support Kubernetes 1.19.

The following limitations in previous versions have been resolved:

You can now identify additional content — such as schema files, stored procedure classes, and third-party JAR files — to be included when initializing a VoltDB database on Kubernetes by specifying their location in the additionalVolumes and additionalVolumeMounts properties. Mounting persistent volume claims to /etc/voltdb/schema, /etc/voltdb/classes, and /etc/voltdb/extension are equivalent to using the voltdb init --schema argument, the --classes argument, or including JAR files in the /lib/extension folder where VoltDB is installed on non-Kubernetes servers.

Improvements associated with SSL/TLS and IPv6 inadvertently added a requirement for Python version 2.7.13 in VoltDB versions 10.2 and 10.1.1. This constraint has been corrected and VoltDB now accepts Python version 2.7.5 and later.

The following limitations in previous versions have been resolved:

The initial release of 10.2 on Kubernetes included the wrong Docker image. This issue is resolved by the 10.2.1 point release. Do not use the initial application and helm chart versions (10.2.0 and 1.3.0). Please be sure to use the latest releases, which are 10.2.1 and 1.3.1 respectively.

This change affects the Kubernetes release of VoltDB only.

The VoltDB Operator for Kubernetes now supports changes to cluster and database configuration properties while the database is running. For properties that can be changed dynamically, the change occurs immediately. For other properties, the Operator orchestrates a cluster restart or rolling upgrade, as needed. See the chapter on updates and upgrades in the VoltDB Kubernetes Administrator's Guide for details.

At the beginning of database replication (DR), a snapshot of the database is created and sent to the joining cluster. Previously, the initialization snapshot was created as a synchronous snapshot — blocking transactions on the existing database until initialization is complete. However, depending on the size of the database, the snapshot could take a significant amount of time to complete, stalling ongoing database transactions until the snapshot is complete.

This release changes the processing of DR initialization snapshots from synchronous to asynchronous. The asynchronous snapshot eliminates the interruption to ongoing work on the active cluster. The one drawback to this change is, when using cross datacenter replication (XDCR) with more than two clusters, if a node fails on the active cluster during the initialization snapshot, existing XDCR connections to other clusters may be lost and need to be reset.

Database replication (DR) is managed by passing binary logs between the participating clusters. The DR consumer acknowledges packets after they have been applied. If the consumer falls behind and has no room in its queue, it throws away additional packets and waits to request them again when it is ready. However, for multi-cluster XDCR environments, this means all clusters are constrained by the latency of the slowest cluster.

Starting with VoltDB V10.0, the management of binary logs was enhanced to track the queuing and acknowledgement of packets for each cluster separately. This means that each DR consumer can process packets at an optimal speed. To help understand the impact of this change, extra fields have been added to the return results of the DRCONSUMER and DRPRODUCER selectors for the @Statistics system procedure. See the description of @Statistics in the Using VoltDB manual for more information.

The following limitations in previous versions have been resolved:

Code improvements to optimize the software upgrade process.

Several settings associated with Kubernetes have been adjusted to provide a better experience when starting and running VoltDB in a Kubernetes environment. Those optimizations include:

The Helm charts for Kubernetes now allow for alternate methods of establishing a network mesh between clusters for cross datacenter replication (XDCR). In particular, you can now use per-pod load balancers so the clusters can connect to each other through externally available IP addresses. See the VoltDB Kubernetes Administrator's Guide for details.

A number of libraries included in the VoltDB distribution have been updated to eliminate security vulnerabilities, including Guava, Jackson, Jetty, Kafka, Log4J, and Netty

The following limitations in previous versions have been resolved:

VoltDB now supports both IPv4 and IPv6 networking. This includes support for IPv6-only environments. When entering IPv6 network addresses, be sure to enclose the address in square brackets. See the implementation note concerning IPv6 addresses for details.

With the original release of VoltDB V10.0 and the VoltDB Operator, you could run multiple VoltDB databases in separate Kubernetes clusters or in separate namespaces within a single cluster. You can now run multiple databases within the same Kubernetes cluster and namespace. To do this, you start by running a single copy of the VoltDB Operator, using the following steps:

When running multiple databases within the same namespace, the only proviso is that you must not stop and delete the Operator until all of the databases it supports are stopped and deleted.

Another change to the VoltDB Operator for Kubernetes provides support for future upgrades to VoltDB installations. Although not available for upgrading V10.0 to V10.1, this new functionality will allow scripted upgrades for all future versions of VoltDB in Kubernetes.

For the initial V10.0 release of the VoltDB Operator, the one-time process for upgrading to V10.1 is:

The sqlcmd directives SHOW TABLES and DESCRIBE have been enhanced to provide additional information about the tables in the database schema. The SHOW TABLES directive now sorts the schema objects between regular tables, data replication (DR) tables, streams, and views. Similarly, the DESCRIBE directive now distinguishes between regular tables and DR tables.

Both the @Statistics and @SystemInformation system procedures have been enhanced to provide additional information. The @Statistics TABLE selector now includes two additional columns indicating whether the table is a DR table or not and, if it is defined as an export table, the name of its export target. The @SystemInformation DEPLOYMENT selector now includes rows for additional paths, such as DR and export overflow and cursors, when appropriate.

The Kafka services within VoltDB (including Kafka import and export) support Kafka version 2.6.0 and later. Support for earlier versions of Kafka is deprecated.

The following limitations in previous versions have been resolved:

VoltDB now offers a complete solution for running VoltDB databases in a Kubernetes cloud environment. VoltDB V10.0 provides managed control of the database startup process, a new VoltDB Operator for coordinating cluster activities, and Helm charts for managing the relationship between Kubernetes, VoltDB and the Operator. The VoltDB Kubernetes solution is available to Enterprise customers and includes support for all VoltDB functionality, including cross data center replication (XDCR). See the VoltDB Kubernetes Administrator's Guide for more information.

For customers who use Prometheus to monitor their systems, VoltDB now provides a Prometheus agent that can collect statistics from a running cluster and make them available to the Prometheus engine. The Prometheus agent is available as a Kubernetes container or as a separate process that can either run on one of the VoltDB servers or remotely and makes itself available through port 1234 by default. See the README file in the /tools/monitoring/prometheus folder in the directory where you install VoltDB for details.

Recent updates to export provide significant improvements to reliability and performance. The key advantages of the new export subsystem are:

Starting with VoltDB V10.0, specifying the product license has moved from the voltdb start command to the voltdb init command. In other words, you only have to specify the license once, when you initialize the database root directory, rather than every time you start the database. When you do specify the license on the init command, it is stored in the root directory the same way the configuration is.

The same rules apply about the default location of the license as before. So if you store your license in your current working directory, your home directory, or the /voltdb subfolder where VoltDB is installed, you do not need to include the --license argument when initializing the database. Also note that the --license argument on the voltdb start command is now deprecated but still operational. So if you have scripts to start VoltDB that include --license on the start command, they will continue to work. However, we recommend you change to the new syntax whenever convenient because support for voltdb start --license may be removed in some future major release.

After internal testing and validation, RHEL and CentOS V8 are now supported platforms for production use of VoltDB.

The export connector for RabbitMQ was deprecated in VoltDB version 9 and has now been removed from the product.

Ubuntu 14, which is no longer supported by Canonical, has been dropped as a production platform for VoltDB.

The following limitations in previous versions have been resolved:

VoltDB reserves the subfolder "segments" under the command log directory for storing the actual command log files. Do not add, remove, or modify any files in this directory. In particular, do not set the command log snapshot directory to a subfolder "segments" of the command log directory, or else the server will hang on startup.

Because DR data is buffered on the master database and then delivered asynchronously to the replica, there is always the danger that data does not reach the replica if a master node stops. This situation is mitigated in a K-safe environment by all copies of a partition buffering on the master cluster. Then if a sending node goes down, another node on the master database can take over sending logs to the replica. However, if multiple nodes go down and rejoin in rapid succession, it is possible that some buffered DR data — from transactions when one or more nodes were down — could be lost when another node with the last copy of that buffer also goes down.

If this occurs and the replica recognizes that some binary logs are missing, DR stops and must be restarted.

To avoid this situation, especially when cycling through nodes for maintenance purposes, the key is to ensure that all buffered DR data is transmitted before stopping the next node in the cycle. You can do this using the @Statistics system procedure to make sure the last ACKed timestamp (using @Statistitcs DR on the master cluster) is later than the timestamp when the previous node completed its rejoin operation.

Bulk operations, such as large deletes, inserts, or updates are possible within a single stored procedure. However, if the binary logs generated for DR are larger than 45MB, the operation will fail. To avoid this situation, it is best to break up large bulk operations into multiple, smaller transactions. A general rule of thumb is to multiply the size of the table schema by the number of affected rows. For deletes and inserts, this value should be under 45MB to avoid exceeding the DR binary log size limit. For updates, this number should be under 22.5MB (because the binary log contains both the starting and ending row values for updates).

There are a number of VoltDB features that help manage the database by constraining memory size and resource utilization. These features are extremely useful in avoiding crashes as a result of unexpected or unconstrained growth. However, these features could interfere with the normal operation of DR when passing data from one cluster to another, especially if the two clusters are different sizes. Therefore, as a general rule of thumb, DR overrides these features in favor of maintaining synchronization between the two clusters.

Specifically, DR ignores any resource monitor limits defined in the deployment file when applying binary logs on the consumer cluster. This means, for example, if the replica database in passive DR has less memory or fewer unique partitions than the master, it is possible that applying binary logs of transactions that succeeded on the master could cause the replica to run out of memory. Note that these resource monitor limits are applied on any original transactions local to the cluster (for example, transactions on the master database in passive DR).

Database Replication (DR) now supports replication across clusters of different sizes. However, if the replica cluster is smaller than the master cluster, it may require a significantly larger Java heap setting. Specifically, if the replica has fewer unique partitions than the master, each partition on the replica must manage the incoming binary logs from more partitions on the master, which places additional pressure on the Java heap.

A simple rule of thumb is that the worst case scenario could require an additional P * R * 20MB space in the Java heap , where P is the number of sites per host on the replica server and R is the ratio of unique partitions on the master to partitions on the replica. For example, if the master cluster is 5 nodes with 10 sites per host and a K factor of 1 (i.e. 25 unique partitions) and the replica cluster is 3 nodes with 8 sites per host and a K factor of 1 (12 unique partitions), the Java heap on the replica cluster may require approximately 320MB of additional space in the heap:

An alternative is to reduce the size of the DR buffers on the master cluster by setting the DR_MEM_LIMIT Java property. For example, you can reduce the DR buffer size from the default 10MB to 5MB using the VOLTDB_OPTS environment variable before starting the master cluster.

Changing the DR buffer limit on the master from 10MB to 5MB proportionally reduces the additional heap size needed. So in the previous example, the additional heap on the replica is reduced from 320MB to 160MB.

The voltadmin status --dr command provides real-time status on the state of database replication (DR). Normally, this includes the status of the current cluster as well as other clusters in the DR environment. (For example, both the master and replica in passive DR or all clusters in XDCR.) However, if the clusters are configured to use different port numbers for the client port, VoltDB cannot reach the other clusters and the command hangs until it times out waiting for a response from the other clusters.

Part of the replication process for XDCR is to verify that the record's starting and ending states match on both clusters, otherwise known as conflict resolution. To do that, XDCR must find the record first. Finding uniquely indexed records is efficient; finding non-unique records is not and can impact overall database performance.

To make you aware of possible performance impact, VoltDB issues a warning if you declare a table as a DR table and it does not have a unique index.

You cannot start XDCR if both databases already have data in the DR tables. Only one of the two participating databases can have preexisting data when DR starts for the first time.

When starting XDCR for the first time, where one database already contains data, a snapshot of that data is sent to the other database. While receiving and processing that snapshot, the receiving database is paused. That is, it is in read-only mode. Once the snapshot is completed and the two database are synchronized, the receiving database is automatically unpaused, resuming normal read/write operations.

Normally, XDCR will automatically restart where it left off after one of the clusters stops and recovers from its command logs (using the voltdb recover command). However, if the workload is predominantly multi-partition write transactions, a failed cluster may not be able to restart XDCR after it recovers. In this case, XDCR must be restarted from scratch, using the content from one of the clusters as the source for synchronizing and recreating the other cluster (using the voltdb create --force command) without any content in the DR tables.

TRUNCATE TABLE is optimized to delete all data from a table rather than deleting tuples row by row. This means that the binary log does not identify which rows are deleted. As a consequence, a TRUNCATE TABLE statement and a simultaneous write operation to the same table can produce a conflict that the XDCR clusters cannot detect or report in the conflict log.

Therefore, do not use TRUNCATE TABLE with XDCR. Instead, explicitly delete all rows with a DELETE statement and a filter. For example, DELETE * FROM table WHERE column=column ensures all deleted rows are identified in the binary log and any conflicts are accurately reported. Note that DELETE FROM table without a WHERE clause is not sufficient, since its execution plan is optimized to equate to TRUNCATE TABLE.

VoltDB provides a way to generate a deterministically unique ID within a stored procedure using the getUniqueId method. This method guarantees uniqueness within the current cluster. However, the method could generate the same ID on two distinct database clusters. Consequently, when using XDCR, you should combine the return values of VoltProcedure.getUniqueId with VoltProcedure.getClusterId, which returns the current cluster's unique DR ID, to generate IDs that are unique across all clusters in your environment.

You can configure and run an XDCR environment in Kubernetes using the VoltDB Operator. However, the XDCR environment is currently limited to two databases at a time.

In an XDCR environment involving three or more clusters, command logging is used to ensure the durability of the XDCR "conversations" between clusters. If not, when a cluster stops, the remaining clusters can be at different stages of their conversation with the downed cluster, resulting in divergence.

For example, assume there are three clusters (A, B, and C) and cluster B is processing binary logs faster than cluster C. If cluster A stops, cluster B will have more binary logs from A than C has. You can think of B being "ahead" of C. With command logging enabled, when cluster A restarts, it will continue its XDCR conversations and cluster C will catch up with the missing binary logs. However, without command logging, when A stops, it must restart from scratch. There is no mechanism for resolving the difference in binary logs processed by clusters B and C before the failure.

This is why command logging is required to ensure the durability of XDCR conversations in a multi-cluster (that is , three or more) XDCR environment. The alternative, if not using command logging, is to restart all but one of the remaining clusters to ensure they are starting from the same base point.

TTL, or time to live, is a feature that automatically deletes old records based on a timestamp or integer column. For replicated tables, the process of checking whether records need to be deleted is performed as a write transaction — even if no rows are deleted. As a consequence, any replicated DR table with TTL defined will generate frequent DR log entries, whether there are any changes or not, significantly increasing DR traffic.

Because of the possible performance impact this behavior can have on the database, use of TTL with replicated tables and DR is not recommended at this time.

A bug in the Apache Kafka client can result in file descriptors being allocated but not released if the producer.type attribute is set to "sync" (which is the default). The consequence is that the system eventually runs out of file descriptors and the VoltDB server process will crash.

Until this bug is fixed, use of synchronous Kafka export is not recommended. The workaround is to set the Kafka producer.type attribute to "async" using the VoltDB export properties.

If, while Kafka import is enabled, the Kafka broker that VoltDB is connected to stops (for example, if the server crashes or is taken down for maintenance), some messages may be lost between Kafka and VoltDB. To ensure no data is lost, we recommend you disable VoltDB import before taking down the associated Kafka broker. You can then re-enable import after the Kafka broker comes back online.

There is an issue with the Kafka importer where, if multiple nodes in the cluster fail and restart, the importer can lose track of some of the data that was being processed when the nodes failed. Normally, these pending imports are replayed properly on restart. But if multiple nodes fail, it is possible for some in-flight imports to get lost. This issue will be addressed in an upcoming release.

When entering a multi-line statement at the sqlcmd prompt, if a line ends in a comment (indicated by two hyphens) and the comment contains an unmatched single quote character, the following lines of input are not interpreted correctly. Specifically, the comment is incorrectly interpreted as continuing until the next single quote character or a closing semi-colon is read. This is most likely to happen when reading in a schema file containing comments. This issue is specific to the sqlcmd utility.

A fix for this condition is planned for an upcoming point release

VoltDB currently intercepts assertions as part of its handling of stored procedures. Attempts to use assertions in stored procedures for debugging or to find programmatic errors will not work as expected.

The UPPER() and LOWER() functions return a string converted to all uppercase or all lowercase letters, respectively. However, for the initial release, these functions only operate on characters in the ASCII character set. Other case-sensitive UTF-8 characters in the string are returned unchanged. Support for all case-sensitive UTF-8 characters will be included in a future release.

There is a problem with how the math library used to build the C++ client library handles large decimal values on 32-bit operating systems. As a result, the C++ library cannot serialize and pass Decimal datatypes reliably on these systems.

Note that the C++ client interface can send and receive Decimal values properly on 64-bit platforms.

Enabling SNMP can take up to 2 minutes to complete. This delay does not always occur and can vary in length. If SNMP is enabled when the database server starts, the delay occurs after the server logs the message "Initializing SNMP" and before it attempts to connect to the cluster. If you enable SNMP while the database is running, the delay can occur when you issue the voltadmin update command or modify the setting in the VoltDB Management Center Admin tab. This issue results from a Java constraint related to secure random numbers used by the SNMP library.

With VoltDB V7.0, cross datacenter replication (XDCR) supports multiple clusters in an XDCR network. However, the VoltDB Management Center currently reports on only one such connection per cluster. In the future, the Management Center will provide monitoring and statistics for all connections to the current cluster.

Shutting down a VoltDB cluster by specifying a replica count of zero should shut down the cluster and remove the pods on which it ran. However, on very rare occasions Kubernetes does not delete the pods. As a result, the cluster cannot be restarted. This is an issue with Kubernetes. The workaround is to manually delete the pods before restarting the cluster.

The property cluster.clusterSpec.additionalVolumes lets you specify additional resources to include in the server classpath. However, if you specify an invalid or misconfigured volume, Helm will not be able to start the cluster and the process will stall.

The Helm --set-file argument lets you set the value of a property as the contents of a file. However, if the contents of the file are binary, they can become corrupted if you try to resize the cluster with the helm upgrade command, using the --reuse-values argument. For example, this can happen if you use --set-file to assign a JAR file of stored procedure classes to the cluster.config.classes property.

This is a known issue for Kubernetes and Helm. The workaround is either to explicitly include the --set-file argument again on the helm upgrade command. Or you can include the content through a different mechanism. For example, you can include class files by mounting them on a separate volume that you then include with the cluster.clusterSpec.additionalVolumes property.

VoltDB works in IPv4, IPv6, and mixed network environments. Although the examples in the documentation use IPv4 addresses, you can use IPv6 when configuring your database, making connections through applications, or using the VoltDB command line utilities, such as voltdb and voltadmin. When specifying IPv6 addresses on the command line or in the configuration file, be sure to enclose the address in square brackets. If you are specifying both an IPv6 address and port number, put the colon and port number after the square brackets. For example:

voltadmin status --host=[2001:db8:85a3::8a2e:370:7334]:21211

Any time the database schema or stored procedures are changed, the data table showing stored procedure statistics at the bottom of the Monitor section of the VoltDB Management Center get reset. As soon as new invocations of the stored procedures occur, the statistics table will show new values based on performance after the schema update. Until invocations occur, the procedure table is blank.

The ASSUMEUNIQUE attribute is designed for identifying columns in partitioned tables where the column values are known to be unique but the table is not partitioned on that column, so VoltDB cannot verify complete uniqueness across the database. Using interactive DDL, you can create a table with a column marked as ASSUMEUNIQUE, but if you try to partition the table on the ASSUMEUNIQUE column, you receive an error. The solution is to drop and add the column using the UNIQUE attribute instead of ASSUMEUNIQUE.

You cannot add or remove a column constraint such as UNIQUE or ASSUMEUNIQUE using the ALTER TABLE ALTER COLUMN statement. Instead to add or remove such constraints, you must first drop then add the modified column. For example:

ALTER TABLE employee DROP COLUMN empID;
ALTER TABLE employee ADD COLUMN empID INTEGER UNIQUE;

For partitioned tables, the value of the column used to partition the table determines what partition the row belongs to. If you use UPDATE to change this value and the new value belongs in a different partition, the UPDATE request will fail and the stored procedure will be rolled back.

Updating the partition column value may or may not cause the record to be repartitioned (depending on the old and new values). However, since you cannot determine if the update will succeed or fail, you should not use UPDATE to change the value of partitioning columns.

The workaround, if you must change the value of the partitioning column, is to use both a DELETE and an INSERT statement to explicitly remove and then re-insert the desired rows.

Starting with VoltDB 6.0, ambiguous column references are no longer allowed. For example, if both the Customer and Placedorder tables have a column named Address, the reference to Address in the following SELECT statement is ambiguous:

SELECT OrderNumber, Address FROM Customer, Placedorder
   . . .

Previously, VoltDB would select the column from the leftmost table (Customer, in this case). Ambiguous column references are no longer allowed and you must use table prefixes to disambiguate identical column names. For example, specifying the column in the preceding statement as Customer.Address.

A corollary to this change is that a column declared in a USING clause can now be referenced using a prefix. For example, the following statement uses the prefix Customer.Address to disambiguate the column selection from a possibly similarly named column belonging to the Supplier table:

SELECT OrderNumber, Vendor, Customer.Address
   FROM Customer, Placedorder Using (Address), Supplier
    . . .

VoltDB opens a file descriptor for every client connection to the database. In normal operation, this use of file descriptors is transparent to the user. However, if there are an inordinate number of concurrent client connections, or clients open and close many connections in rapid succession, it is possible for VoltDB to exceed the process limit on file descriptors. When this happens, new connections may be rejected or other disk-based activities (such as snapshotting) may be disrupted.

In environments where there are likely to be an extremely large number of connections, you should consider increasing the operating system's per-process limit on file descriptors.

There are two ways to access additional resources in a VoltDB database. You can place the resources in the /lib folder where VoltDB is installed on each server in the cluster or you can include the resource in a subfolder of a JAR file you add using the sqlcmd LOAD CLASSES directive. Adding resources via the /lib directory is useful for stable resources (such as third-party software libraries) that do not require updating. Including resources (such as XML files) in the JAR file is useful for resources that may need to be updated, as a single transaction, while the database is running.

LOAD CLASSES is used primarily to load classes associated with stored procedures and user-defined functions. However, it will also load any additional resource files included in subfolders of the JAR file. You can remove classes that are no longer needed using the REMOVE CLASSES directive. However, there is no explicit command for removing other resources.

Consequently, if you rename resources or move them to a different location and reload the JAR file, the database will end up having multiple copies. Over time, this could result in more and more unnecessary memory being used by the database. To remove obsolete resources, you must first reinitialize the database root directory, start a fresh database, reload the schema (including the new JAR files with only the needed resources) and then restore the data from a snapshot.

If a server has multiple network interfaces (and therefore multiple IP addresses) VoltDB will, by default, open ports on all available interfaces. You can limit the ports to an single interface in two ways:

Also, when using an IP address to reference a server with multiple interfaces in command line utilities (such as voltadmin stop node), use the @SystemInformation system procedure to determine which IP address VoltDB has selected to identify the server. Otherwise, if you choose the wrong IP address, the command might fail.

On startup, VoltDB extracts certain native libraries into the /tmp directory before loading them. This works in all standard operating environments. However, in custom installations where the /tmp storage is mounted with the "noexec" option, VoltDB cannot extract the libraries and, in the past, refused to start.

For those cases where the /tmp directory is assigned on storage mounted with the ‘noexec’ option, you can assign an alternative storage for VoltDB to use for extracting and executing temporary files. This is now done automatically on Kubernetes and does not require any user intervention.

On non-Kubernetes environments, you can identify an alternative location by assigning it to volt.tmpdir, org.xerial.snappy.tmpdir, and jna.tmpdir in the VOLTDB_OPTS environment variable before starting the server process. The specified location must exist, must be an absolute path, and cannot be on storage mounted with the "noexec" option. For example, the following command assigns an alternate temporary directory called /volttemp:

export VOLTDB_OPTS="-Dvolt.tmpdir=/volttemp \
                    -Dorg.xerial.snappy.tempdir=/volttemp \
                    -Djna.tmpdir=/volttemp"

When using an alternate temporary directory, files can accumulate over time since the directory is not automatically purged on startup. So you should make sure you periodically delete old files from the directory.

See the Volt Kubernetes Compatibility Chart for information on which versions of the Volt Operator and Helm charts support which version of VoltDB. See the VoltDB Operator Release Notes for additional information about individual releases of the VoltDB Operator.